Vlan Config - TP-Link TL-SL3428 User Manual

Choose the menu"Ownvkecuv→KIOR"Upqqrkpi→XNCP"Eqphki"to load the following page."
The following entries are displayed on this screen:
XNCP"Eqphki"
"
XNCP"KF<"
Tqwvgt"Rqtv"Vkog<"
Ogodgt"Rqtv"Vkog<"
Ngcxg"Vkog<"
Uvcvke"Tqwvgt"Rqtvu<"
XNCP"Vcdng"
"
XNCP"KF"Ugngev<"
Ugngev<"
XNCP"KF<"
Tqwvgt"Rqtv"Vkog<"
Ogodgt"Rqtv"Vkog<"
Figure 8-6 VLAN Config
Enter the VLAN ID to enable IGMP Snooping for the desired
VLAN.
Specify the aging time of the router port. Within this time, if the
switch doesn't receive IGMP query message from the router port,
it will consider this port is not a router port any more.
Specify the aging time of the member port. Within this time, if the
switch doesn't receive IGMP report message from the member
port, it will consider this port is not a member port any more.
Specify the interval between the switch receiving a leave message
from a host and the switch removing the host from the multicast
groups.
Enter the static router ports which are mainly used in the network
with stable topology.
Click the Select button to quick-select the corresponding VLAN ID
based on the ID number you entered.
Select the desired VLAN ID for configuration. It is multi-optional.
Displays the VLAN ID.
Displays the router port time of the VLAN.
Displays the member port time of the VLAN.
97