Auto Collate; Setting Image Orientation Priority - Canon iR6570 Manual

Auto Collate

If Auto Collate is set to 'On', the machine automatically sets the Collate (Offset Collate) mode
when originals are placed in the feeder. This is useful when making multiple sets of copies,
because you do not need to remember to select the Finisher mode.
NOTE
• If Auto Collate is set to 'On' and an optional finisher is attached, the Offset Collate mode is set. However,
if no finisher is attached, the Collate mode is set instead.
• The default setting is 'On'.
1
Press
2
Select [On] or [Off] © press [OK].
The selected mode is set.

Setting Image Orientation Priority

The orientation of the image may be printed conversely depending on the copy mode set.
With this function, you can set whether to copy the image in the same direction as the
original.
NOTE
• When the Image Orientation Priority is set to 'On', the copies will take longer to process than normal.
• The default setting is 'Off'.
1
Press
© [Copy Settings] © [Auto Collate].
© [Copy Settings] © [M] © [Image Orientation Priority].
Customizing Copy Settings
8
8-15