3
Press [Done].
This completes the settings for reserving a print job using the stack bypass. The subsequent
steps show you how to start printing and load paper into the stack bypass.
4
Press [Start Print].
5
When it is time for the reserved print job to be printed, lift the paper
retaining lever, load the specified paper into the stack bypass, then
lower the paper retaining lever.
NOTE
• The specified paper size/type is displayed on the screen when it is time for the reserved print job
to be printed.
• Make sure to load the same paper size and type selected in step 2 into the stack bypass.
Printing does not start if paper of a different size or type is loaded.
Reserving Jobs
2-51
2