Canon iR6570 Manual page 293

G If you want to set the number of repeats automatically:
❑
Press [Auto].
The default setting is 'Auto'. If [Auto] is already selected, this step is not necessary.
The original image is copied so that the maximum possible number of repeats fit onto the
selected paper size.
G If you want to set the number of repeats manually:
❑
Press [-] or [+] to set the number of times that you want the image to repeat.
You can set the number of repeats from 1 to 20.
IMPORTANT
The repeated images may overlap or have gaps between them, depending on the number of
repeats that you set.
Image Repeat 4-75
4