Selecting The Copy Paper Size (Paper Select) - Canon iR6570 Manual

4
Press [Done].
The display returns to the Express Copy Basic Features screen.

Selecting the Copy Paper Size (Paper Select)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Paper
Selection," on p. 1-29.
1
Select the paper source.
The paper sizes/types are indicated by icons on the touch panel display, in the order in which
they are loaded in the paper drawers (Manual Paper Selection).
Press [Auto] to set the machine to automatically select the copy paper size.
To select the stack bypass for the current job, or to reserve the stack bypass for a reserved job,
select [Stack Bypass Settings].
IMPORTANT
• The Automatic Paper Selection mode cannot be used with the Auto Zoom, XY Zoom (Auto XY
Zoom), Saddle Stitch, Image Combination, Booklet, Image Repeat (Auto), or Tab Paper Creation
mode.
• When the machine is operating in the Different Size Originals mode in combination with the Shift,
Front Cover/Back Cover, or Paper Insertion (Sheet Insertion or Chapter Page) mode, you cannot
use the Automatic Paper Selection mode.
• The following types of originals cannot be copied by using Automatic Paper Selection. Copy
these using Manual Paper Selection:
- Non-Standard sized originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- Originals smaller than A6R size
Making a Copy With the Express Copy Basic Features Screen
7
7-19