Auto Collate
The Auto Collate mode enables automatic selection of the Collate (Offset Collate)
mode when originals are placed in the feeder. This is helpful if you frequently make
multiple sets of copies using the Finishing modes.
NOTE
The default setting is 'OFF'.
1
Press
SETTINGS> menu.
If necessary, see the screen shots in steps 1 and 2 in "Image Direction Priority,"
on p. 3-5.
2
Press [
➞ press [OK].
COPY SETTINGS
3.STANDARD SETTINGS
The <STANDARD SETTINGS> menu appears.
3
Press [
press [OK].
STANDARD SETTINGS
5.AUTO COLLATE
The <AUTO COLLATE> menu appears.
[Additional Functions] ➞ open the <COPY
] or [
] until <STANDARD SETTINGS> appears
] until <AUTO COLLATE> appears ➞
] or [
Specifying Copy Settings
3
3-15