Feeding Different-Sized Originals Together In The Feeder; Feeding Different-Sized Originals Together In The Feeder (Different Size Originals) - Canon iR6570 Manual

2
Press [Job Build] © [Set].
3
Press [Done].
The display returns to the Express Copy Basic Features screen.

Feeding Different-Sized Originals Together in the Feeder

(Different Size Originals)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Different
Size Originals," on p. 4-63.
IMPORTANT
• The Different Size Originals mode can not be used with the Book 2-Sided, Two-page Separation,
Image Combination, Booklet, or Image Repeat modes.
• All originals placed together in the feeder must be the same weight (paper type).
• Align the top edge of the originals with the back edge of the feeder if you are placing originals with
different widths. ("Width" refers to the vertical measurement of the paper from the front of the machine
to the back of the machine when the paper is placed in the feeder or on the platen glass.)
• If the originals are placed in the feeder, set different size originals in the following combinations. Other
combinations may damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR
• If you place originals with different widths into the feeder, the originals may move slightly when fed to the
platen glass. As a result, the images may be scanned and copied as slanted.
• If the Different Size Originals mode is set, the scanning speed may be slower than normal.
• If the Different Size Originals mode is set in combination with the Shift, Front Cover/Back Cover, or
Paper Insertion (Sheet Insertion or Chapter Page) mode, you cannot use the Automatic Paper Selection
mode.
• When placing different sized originals and printing them with their respective paper sizes, the output is
not stapled.
• The Auto Orientation will not be performed when you set the Different Size Original mode.
Making a Copy with Two-Page Separation and Different Size Originals Settings (Scan Originals)
7
7-55