3
4
7
7-64
Making a Copy with the Booklet, Shift Settings (Book/Page Edit/Shift)
Select the desired paper insertion feature ([Sheet Insertion],
[Chapter Page], or [Tab Paper]) © press [Add].
You cannot select [Sheet Insertion] and [Chapter Page] at the same time.
To check/change a specific setting, press [M] or [L] to scroll to the desired page © select the
page © press [Edit].
To erase a specific setting, press [M] or [L] to scroll to the desired page © select the page ©
press [Erase].
When you select [Tab Paper], set the copy shift width for the tab paper.
Enter the page number where you want sheet insertions, chapter
pages, or tab paper to be inserted.
❑
Enter the page number where you want the sheet insertion added using
keys) © press [OK].
❑
Press [Paper Select] © select the paper source.
IMPORTANT
• Select the same sized paper for [Sheet Insertion] (or [Chapter Page]) and [Tab Paper]. If you set
[Front Cover] or [Back Cover], select the same sized paper as the inserted sheets.
• When you select [Front Cover], [Back Cover], [Sheet Insertion] (or [Chapter Page]), if the paper
size for one feature is changed to another size, the other two features are changed. However,
you may change the paper drawer for one feature without affecting the others, as long as the
paper size is the same.
• When you select [Tab Paper], only A4 paper can be used.
-
(numeric