Page Order (Staple); Copying - Canon iR6570 Manual

Page Order (Staple)

IMPORTANT
The Staple mode can be set only if an optional finisher is attached.

Copying

1
3
2
G If the optional Finisher-T1 is attached:
3-46 Collating Copies/Prints
Place your originals © press [Finisher].
If necessary, see the screen shot in step 1 of "Copying" in "Page Order (Collate)," on p. 3-36.
NOTE
If Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collate
or Offset Collate mode is automatically set when you place your originals in the feeder. (See
"Auto Collate," on p. 8-15.)
Specify the stapling settings.
If you want hole punches made, press [Hole Punch].
❑
Press [Staple] © [OK].
If the optional Finisher-T1 is attached
If the optional Finsher-T1 and Puncher Unit-L1 are attached