Sample Print
Before making multiple prints of a document stored in an inbox, you can print a sample of it to
check its contents or the print results with the settings that were set when the document was
stored.
IMPORTANT
• You cannot make a sample print of documents stored in the Memory RX Inbox or Confidential Fax
Inboxes.
• [Sample Print] is usually grayed out when multiple documents are selected until you press [Merge
Documents] and select the Collate, Offset Collate, Rotate Collate, or Staple mode. [Sample Print] does
not appear if the Group mode is set.
NOTE
You can make a sample print even when one print is specified.
1
Select the document stored in an Inbox © display the Change Print
Settings screen.
❑
Select the desired User Inbox number and the document to print.
❑
Press [Print].
If necessary, see steps 1 to 5 of "Printing Documents Stored in an Inbox," on p. 2-23.
The Print screen appears.
2
Press [Sample Print] © [Start Print].
Printing starts and one sample print is output.
Sample Print
2-55
2