Canon iR6570 Manual page 246

I Divided Booklet
This mode enables you to make a multiple page document with a large number of pages into a divided
booklet.
4
IMPORTANT
• The Booklet mode cannot be used with the following mode(s).
- Copy: Stack Bypass Settings (2nd Side of 2-Sided Page), Entire Image, Automatic Paper Selection,
Finisher, Two-sided, Two-page Separation, Cover/Sheet Insertion, Shift (No. Key Entry), Image
Combination, Transparency Interleaving, Margin, Different Size Originals, Frame Erase, Image
Repeat, Mirror Image, Form Composition, Tab Paper Creation, Scan Image Check, Page Numbering,
Watermark/Print Date
- Mail Box: Stack Bypass Settings (2nd Side of 2-Sided Page), Automatic Paper Selection, Finisher,
Two-Sided Printing, Cover/Job Separator, Cover/Sheet Insertion, Form Composition, Margin, Page
Numbering, Watermark/Print Date, Tab Paper Creation
• The Divided Booklet mode cannot be used with the Remote or Cascade Copy mode, in addition to the
above mentioned modes.
• Saddle stitching is not performed if there is only one output sheet.
• Saddle stitching can be performed only if the optional Saddle Finisher-T2 is attached.
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the type and quantity
of paper.
4-28 Booklet Mode
Originals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Copies/Prints
Number of Sheets to Divide
*1 In the above example illustration,
the number of sheets is two.
*1