Canon iR6570 Manual page 273

IMPORTANT
The Original Frame Erase mode cannot be used with the following mode(s).
- Copy: Entire Image, Cover/Sheet Insertion (Tab Paper), Image Combination, Booklet, Image Repeat,
Mirror Image, Tab Paper Creation, Page/Copy Set Numbering, Watermark/Print Date
- Mail Box: Document Size Select (Auto), Booklet Scanning, Different Size Originals, Image
Combination
NOTE
The procedure for storing documents in an inbox is the same as for copying.
1
On the Special Features screen, press [Frame Erase].
2
Press [Original Frame Erase].
3
Press [-] or [+] to set the frame erase width.
If you enter a value using
prompting you to enter an appropriate value appears on the screen.
NOTE
• The default setting is '4 mm'. The maximum original frame erase width that you can set is '50
mm'.
• For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the
Reference Guide.
- (numeric keys) outside the setting range, a message
Frame Erase 4-55
4