3
Enter a name © press [OK].
The maximum number of characters that you can enter for a key name is 10.
The assigned name appears on the key.
NOTE
• For instructions on entering characters, see Chapter 2, "Basic Operations," in the Reference
Guide.
• If you press [OK] without entering any characters, the key name reverts to its current name
(default M1 to M9).
4
Press [Cancel].
Recalling Scan/Print/Copy Settings
1
On the Special Features screen, press [Mode Memory].
2
Select the key containing the copy settings that you want to recall.
Memory Keys
5-7
5