Different Size Originals - Canon iR6570 Manual

Different Size Originals

This mode enables you to copy (scan) different size originals with the same widths such as A3
and A4, together as one group.
IMPORTANT
• The Different Size Originals mode cannot be used with the following mode(s).
- Copy: Book 2-Sided, Two-page Separation, Image Combination, Booklet, Image Repeat
- Mail Box: Document Size Select (Manual), Two-page Separation, Booklet Scanning, Original Frame
Erase, Book Frame Erase, Image Combination
• If the originals are placed in the feeder, make sure that the different size originals are of the same weight
(paper type).
• Align the top edge of the originals with the back edge of the feeder if you are placing originals with
different widths. ("Width" refers to the vertical measurement of the paper from the front of the machine
to the back of the machine when the paper is placed in the feeder or on the platen glass.)
• If the originals are placed in the feeder, set different size originals in the following combinations. Other
combinations may damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR
• If you place originals with different widths into the feeder, the originals may move slightly when fed to the
platen glass. As a result, the images may be scanned and copied as slanted.
• If the Different Size Originals mode is set, the scanning speed may be slower than normal.
• When copying, if the Different Size Originals mode is set in combination with the Shift mode or the
Cover/Sheet Insertion (Front Cover, Back Cover, Sheet Insertion, or Chapter Page) mode, you cannot
use the Automatic Paper Selection mode.
• When placing different sized originals and printing them with their respective paper sizes, the output is
not stapled.
• When copying, if the Different Size Originals mode is set, Auto Orientation is not performed.
NOTE
• The procedure for storing documents in an inbox is the same as for copying.
• When copying, if the Different Size Originals mode is used with the 1 2-Sided mode, the copies are
output as one-sided copies on paper of their respective sizes if the originals for the front and back sides
of a two-sided copy are different in size.
1
On the Special Features screen, press [Different Size Originals].
The selected mode is set.
Different Size Originals
4
4-63