Reducing/Enlarging Using The Original And Copy/Record Sizes - Canon iR6570 Manual

3
Reducing/Enlarging Using the Original and Copy/Record
Sizes
The Zoom Programme mode enables you to reduce or enlarge originals by individually entering
3
the dimensions of the original and copy paper (record size).
The available copy ratios are from 25% to 400% when the original is placed on the platen glass,
and from 25% to 200% when the original placed in the feeder.
The following two Zoom Programme modes are available.
IMPORTANT
Zoom Programme modes cannot be used with the following modes(s).
- Copy: Cover/Sheet Insertion (Tab Paper), Tab Paper Creation
NOTE
The specified sizes are converted into a copy (zoom) ratio (%) by the machine using the formula below.
The result is rounded to the closest integer.
Copy (zoom) ratio (%) = (copy (record) size/original size) x 100
I Making Copies (Scanning) with the Same XY Copy/Zoom Ratio (Zoom)
You can set the same copy (zoom) ratio for both the horizontal (X) and vertical (Y) axes.
3-18 Changing the Copy (Zoom) Ratio
Press .
Copying starts.
NOTE
• To cancel this setting, press [Copy Ratio]
• To cancel all settings and return the machine to the Standard mode, press
Original
©
[Entire Image].
Copy
.