Canon iR6570 Manual page 237

G If you select [Tab Paper]:
❑
Enter the page number where you want the tab paper added
and press [OK].
You can change the paper source settings if necessary. However, if you change the paper
source, all of the paper sources for tab paper are changed.
Repeat steps 7 and 8 until all insertion points and settings for all of the insertion sheets are
set.
IMPORTANT
• The settings are displayed in the order of insertion.
• You cannot set the sheet insertion and chapter page positions on the first page. Set their
positions starting from the second page. However, you can set the tab paper position from the
first page.
• If you select [Copy on Both Sides] for the front cover and a tab paper is set to insert in front of the
first page, the front cover is output first as blank and then the printed tab paper is output.
• If you select [Leave Blank] for the sheet insertion, you can set the same page with a tab paper. In
this case, the paper for the sheet insertion is output first and then the tab paper is output.
NOTE
You can insert up to 100 sheet insertions, chapter pages, or tab papers.
- (numeric keys),
Cover/Sheet Insertion
4
4-19