Collating Pages And Stapling (Staple) - Canon iR6570 Manual

Collating Pages and Stapling (Staple)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Page
Order (Staple)," on p. 3-46.
IMPORTANT
• The Finisher modes cannot be set if [Transparencies], [Tracing paper], or [Labels] is selected as the
paper type.
• The Staple mode can be set only if an optional finisher is attached.
• The Staple mode cannot be used with the Booklet or Transparency Interleaving mode.
• The Saddle Stitch mode cannot be used with the Remote and Cascade Copy, Hole Punch, 2 1-Sided,
Book 2-Sided, Automatic Paper Selection, Two-page Separation, Front Cover/Back Cover, Paper
Insertion, Image Combination, Booklet, Transparency Interleaving, Form Composition, Tab Paper
Creation, Page Numbering/Copy Set Numbering, or Watermark/Print Date mode.
• When [Add Cover] is selected in the Saddle Stitch mode, it cannot be used with the Image Repeat or
Mirror Image mode, in addition to the above mentioned modes.
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and the
number of sheets.
1
7
7-32 Making a Copy With the Express Copy Basic Features Screen
Press [Staple].
Press [Collate Not Set] if you do not want to collate the output.
Collate Not Set
Staple