Auto Collate - Canon iR3245 Manual

Auto Collate

If Auto Collate is set to 'On', the machine automatically sets the Collate (Offset Collate) mode when
originals are placed in the feeder. This is useful when making multiple sets of copies, because you do
not need to remember to select the Finishing mode.
Remark
The Auto Collate mode is available only if the optional
Feeder (DADF-U1) is attached (standard-equipped for
the iR3245N/iR3235N/iR3225N).
1. Press
8
2. Select [On] or [Off] → press [OK].
8-14 Auto Collate
→ [Copy Settings] → [Auto Collate].
If Auto Collate is set to 'On' and an optional finisher is
attached, the Offset Collate mode is set. However, if
no finisher is attached, the Collate mode is set instead.