Canon iR6570 Manual page 41

If you press [Details], the detailed information for the selected printing destination is displayed.
The display returns to the Regular Copy Basic Features screen.
IMPORTANT
Error Recovery activates only if the Finisher mode is set.
NOTE
• It is impossible to choose two different machines other than your own for cascade copying.
You must include your own machine as one of the output devices.
• If Error Recovery for Cascade Copy is set to 'On', the remaining copy job is not processed in the
following cases:
- The machine is scanning originals for the Cascade Copy mode.
- The Cascade Copy mode is used in combination with the Cover/Sheet Insertion mode.
- The Cascade Copy mode is used in combination with the Different Size Originals, Auto Paper
Selection, and Two-Sided modes.
- The normally-operating printer has completed the cascade copy job.
- An error occurs in the normally-operating printer.
- The cascade copy job has almost finished.
- The number of copies is less than six.
- The Cascade Copy mode is used in combination with the Page Numbering/Copy Set
Numbering mode.
• If Error Recovery for Cascade Copy is set to 'On', a machine in which an error occurs cannot
resume the remaining copy job even after the error has been resolved, if the copy job has already
been reassigned.
Selecting an Output Device (Select Output Device)
1
1-27