Canon iR6570 Manual page 35

NOTE
• In order for a device to be selected as a remote output device used for remote copying, it must be stored
in the Register Remote Device in the Copy Settings (from the Additional Functions screen). (See
"Specifying the Remote Copy Printer Settings," on p. 8-19.)
• For cascade copying, the Paper Select screen of this machine is displayed. Select the paper drawer on
the machine that is loaded with the same paper size as the remote copy printers.
• To copy the original on this machine and another remote copy printer on the network at the same time
(cascade copying), the number of copies set for this machine and the number of copies set for the
remote copy printer are split in half and printed. If an odd number of copies is set, the machine you are
copying from will print one additional copy.
• If you select a remote copy printer before performing cascade copying, you cannot select copy settings
that are not supported by the remote copy printer. Also, if the finishers attached to this machine and the
remote copy printer are different, the finisher settings can only be set to Collate and Group modes.
• When one remote copy or one cascade copy job is in progress, it is not possible to schedule another
remote copy or cascade copy job.
• For the selected remote copy printer, set the same Department ID and password as this machine. (See
Chapter 6, "System Manager Settings," in the Reference Guide.)
• When one remote copy or one cascade copy job is in progress, if an error occurs in the remote copy
printer, an error message is displayed on the Job/Print monitor area of the touch panel display of this
machine and the remote copy printer.
Selecting an Output Device (Select Output Device)
1
1-21