Canon iR6570 Manual page 184

NOTE
• To use the Saddle Stitch mode, the original (stored document) must already be in booklet form. (See
"Booklet Mode," on p. 4-27 and "Booklet Scanning," on p. 4-36.)
• [Saddle Stitch] can be set only if the 1 2-Sided, 2 2-Sided, or Two-Sided Printing mode is selected.
(See "Two-Sided Copying/Printing" on p. 3-52.)
I If No Finisher Mode Is Set:
If the Collate, Group, and Staple modes are not set, copies are output as follows:
3
I If the Hole Punch Mode Is Set:
The machine punches two holes in the output.
IMPORTANT
• The Hole Punch mode cannot be used with the following mode(s).
- Copy: Saddle Stitch, Transparency Interleaving, Booklet
- Mail Box: Booklet
3-34 Collating Copies/Prints
Originals Copies