Canon iR6570 Manual page 223

3
Select the desired mode from the Special Features screen.
IMPORTANT
Depending on the mode, you may have to place your original on the platen glass or in the feeder.
See the corresponding section on each mode for detailed information.
4
Set the desired mode.
For more information on setting each mode, see the corresponding section.
To set other modes at the same time, repeat steps 3 and 4.
5
Press .
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display © press
Scanning starts.
NOTE
• To cancel this setting, follow the procedure below.
- For modes which have a right triangle ( ) on the bottom right of their key:
Example: Frame Erase
Press [Special Features]
- For modes which do not have a right triangle ( ) on the bottom right of their key:
Example: Job Build
Press [Special Features]
• To cancel all settings and return the machine to the Standard Scan mode, press [Initial Settings].
To return to the Inbox Selection screen, press
once for each original. When scanning is complete, press [Done].
© ©
[Frame Erase] [Cancel]
©
[Job Build]
.
What are Special Features?
4
4-5