4
Set the desired mode.
For more information on setting each mode, see the corresponding section.
To set other modes at the same time, repeat steps 3 and 4.
5
Press [Start Print].
If there is a current or reserved print job, the document is placed in the queue and is printed
after the current or reserved job is complete.
Printing starts.
NOTE
• To cancel this setting, follow the procedure below.
- Example: Booklet
Press [Special Features]
• To cancel all settings and return the machine to Standard Local Print Settings, press [Initial
Settings]. To return to the Inbox Selection screen, press
©
©
[Booklet]
[Cancel]
.
What are Special Features?
4
4-7