Job Done Notice - Canon iR6570 Manual

Job Done Notice

This mode enables you to set the machine to notify you through e-mail when the current copy
job is done. This is especially useful when you are waiting in line for a large copy job to
complete or when you are using the Remote or Cascade Copy mode.
IMPORTANT
To be able to set the Job Done Notice mode, you must first store your e-mail address in the Address
Book. (See Chapter 9, "Storing/Editing Address Book Settings," in the Sending Guide.)
NOTE
• The Job Done Notice is available for the Copying function only.
• The Job Done Notice can be set only if the Universal Send Kit is activated.
1
On the Special Features screen, press [Job Done Notice].
2
If you want to select a destination managed with the Access Number
Management setting, press [Access Number].
If you want to select a destination that is not managed with the Access Number Management
setting, or if the Access Number Management setting is not set to 'On', proceed to step 4.

Job Done Notice

4-69
4