Making Copies With The Original Image Shifted (Shift); Making Copies With The Original Image Shifted To The Center Or A Corner - Canon iR6570 Manual

Making Copies with the Original Image Shifted (Shift)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Shifting
the Original Image," on p. 4-47.
IMPORTANT
• The Shift (Center/Corner Shift) mode can not be used with the Paper Insertion (Tab Paper), Image
Repeat, Mirror Image, or Tab Paper Creation mode.
• The Shift with No. Key Entry mode cannot be used with the Remote or Cascade Copy, Image
Combination, Booklet, Page Numbering/Copy Set Numbering, or Watermark/Print Date mode in
addition to the modes mentioned above.
• The Shift mode cannot be selected when you set the Different Size Originals mode in combination with
the Automatic Paper Selection mode.
• If the original and the copy paper are the same size and the copy ratio is set at 100%, the image of the
original is not shifted.
• The default setting is 'Center.'
• If you use the numeric keys to enter the shift position, the original image may be partially cut off on the
copy, depending on the size of the original, the size of the copy paper, and the amount of shift specified.
Making Copies with the Original Image Shifted to the Center or a
Corner
1
7
7-84 Making a Copy with the Booklet, Shift Settings (Book/Page Edit/Shift)
Press [Book/Page Edit/Shift].