Canon iR6570 Manual page 249

IMPORTANT
• You must select the same paper size for the cover page as that used for copying the main
document.
• Only 64 to 200 g/m
2
• Only 64 to 90 g/m
2
paper can be used for the main document.
• If you select [Add Cover], you cannot specify the stack bypass as the paer source used for the
main document.
• When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become
dirty, or the paper could jam, and a service repair may be needed.
NOTE
You must load the paper for the cover page face down in the stack bypass.
4
Select whether to saddle stitch the booklet © press [OK].
G If [Divided Booklet] is selected:
❑
Specify the number of sheets that you want to divide by using [-] and [+] © press [OK].
You can set the number of sheets to be divided from 1 to 15.
You can also enter values using
The selected mode is set.
paper can be used for the cover page.
- (numeric keys).
Booklet Mode 4-31
4