Canon iR6570 Manual page 104

3
2
G If you want to set the machine to automatically select a paper size:
2-32 Paper Selection
NOTE
• If you press [Original Settings], the settings for documents received from a computer are
returned to the settings specified at the computer, and the settings for documents scanned and
recorded at the machine are returned to the Standard Local Print Settings. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
• The paper size/type that can be used may vary depending on the settings for the finisher. (See
"Collating Copies/Prints," on p. 3-30.)
Select the desired paper size.
NOTE
• If you want to select [Tracing Paper], [Transparency], or [Labels] for the stack bypass, do not set
any of the Finisher modes (e. g., Collate, Group, and Staple modes).
• If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is
set to 'On', and the paper size/type have been stored, the selected paper size/type are displayed
on the screen. (See Chapter 4, "Customizing Settings," in the Reference Guide.)
❑
Press [Auto].