Canon iR6570 Manual page 239

NOTE
• Make sure that the Number of Tabs shown on the Tab Paper Copy Shift Width Settings screen is
the same as the number of tabs on the tab paper set in the paper drawer.
• If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the
Additional Functions beforehand. (See Chapter 4, "Customizing Settings," in the Reference
Guide.)
• The default setting is 13 mm.
• You can change the number of tabs in Store Paper Type from the Additional Functions screen.
(See Chapter 4, "Customizing Settings," in the Reference Guide.)
11
Press [Done].
The display returns to the Regular Copy Basic Features screen.
12
Press .
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display. Press
Copying starts.
NOTE
• To cancel this setting, press [Special Features]
order.
• To cancel all settings and return the machine to the Standard mode, press
once for each original. When scanning is complete, press [Done].
©
[Cover/Sheet Insertion]
©
[Cancel] in this
.
Cover/Sheet Insertion
4
4-21