Canon iR6570 Manual page 183

I If the Staple Mode Is Set:
The copies are automatically collated into sets arranged in page order and stapled. The output is as
follows:
• If you select [Corner] (Top Left):
Originals
• If you select [Double] (Left):
Originals
• If you select [Saddle Stitch]:
Originals
IMPORTANT
• The Staple mode cannot be used with the following mode(s).
- Copy: Booklet, Transparency Interleaving
- Mail Box: Booklet
• The Saddle Stitch mode cannot be used with the following mode(s) in addition to the modes mentioned
above.
- Copy: Remote or Cascade Copy, Hole Punch, 2 1-Sided, Book 2-Sided, Automatic Paper
Selection, Two-page Separation, Cover/Sheet Insertion, Image Combination, Form Composition, Tab
Paper Creation, Page/Copy Set Numbering, Watermark/Print Date
- Mail Box: Automatic Paper Selection, Cover/Job Separator, Cover/Sheet Insertion, Form Composition,
Tab paper Creation, Page/Copy Set Numbering, Watermark/Print Date
• If [Add Cover] is selected in the Saddle Stitch mode, it cannot be used with the following mode(s) in
addition to the modes mentioned above.
- Copy: Image Repeat, Mirror Image
• The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and the
number of sheets.
Set 1
Three Copies
of Each Page
Collated in
Page Order
Set 1
Three Copies
of Each Page
Collated in
Page Order
Set 1
Three Copies
of Each Page
Collated in
Page Order
Set 2 Set 3
Set 2 Set 3
Set 2 Set 3
Collating Copies/Prints
3
3-33