Canon iR6570 Manual page 200

3
3-50 Collating Copies/Prints
• If [Add Cover] is selected, select whether to print on cover © press [Next].
• Select the type of paper for the cover if necessary © press [Next].
• Load the paper for the cover into the stack bypass.
• Select the paper size © press [OK].
The selected mode is set, and the display returns to the Regular Copy Basic Features
screen.
IMPORTANT
• Make sure to use the same paper size for the cover and the main document.
• Only 64 to 200 g/m
2 paper can be used for the cover page.
• Only 64 to 90 g/m
2
paper can be used for the main document.
• If you select [Add Cover], you cannot specify the stack bypass as the paer source used for the
main document.
• Make sure to place the paper for the cover into the stack bypass with the surface you want to
print on face down.
• When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become
dirty, or the paper could jam, and a service repair may be needed.
NOTE
• You can adjust the saddle stitch position in Adjustment/Cleaning (from the Additional Functions
screen). (See Chapter 4, "Customizing Settings," in the Reference Guide.)
• [Stitching Position] is a shortcut key to Saddle Stitch Position Adjustment in Adjustment/
Cleaning (from the Additional Functions screen).