Canon iR6570 Manual page 243

4
Select the paper source for each selected feature © press [Done] ©
[Next].
If only [Job Separator] is selected, select the paper source for the job separator sheets ©
press [Done] © [OK].
IMPORTANT
• Select the same paper size for [Front Cover], [Back Cover], and [Job Separator].
• If you try to set a different paper size for one feature, the paper sizes for the other features are
automatically changed to the new paper size. However, if you are switching to another paper
source with the same paper size, the settings for the other features will not change.
5
Select the side(s) to be printed for the front and/or back cover ©
press [OK].
The selected mode is set.
Cover/Job Separator 4-25
4