Canon iR6570 Manual page 410

7
7-68 Making a Copy with the Booklet, Shift Settings (Book/Page Edit/Shift)
❑
Press [Select Original Size] © set the size of the original to scan.
❑
If the original is two-sided, press [2-Sided Original] © select the type of two-sided original ©
press [OK].
❑
Press [Paper Select] © select the paper source.
❑
If you want to add a cover, press [Add Cover], select the paper source for the cover, select
whether to copy on the cover page, select paper type, and press [OK].
IMPORTANT
• The paper used for the cover page must be the same paper size as that which is used for
copying the main document.
• Only 64 to 200 g/m
2
paper can be used for the cover page.
• Only 64 to 90 g/m
2 paper can be used for the main document.
• If you select [Add Cover], you cannot specify the stack bypass as the paer source used for the
main document.
• When printing on special types of paper, such as heavy paper or transparencies, be sure to
correctly set the paper type, especially if you are using heavy paper. If the type of paper is not set
correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become
dirty, or the paper could jam, and a service repair may be needed.