Using The Stack Bypass - Canon iR6570 Manual

Using the Stack Bypass

Reserved printing using the stack bypass is possible only if paper is being fed from the stack
bypass for the current job.
The following example assumes that A3 plain paper is being fed from the stack bypass for the
current job, and that you are selecting A4 plain paper to be fed from the stack bypass for a
reserved job.
NOTE
If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is set to
'On', reserved printing can be performed only for the registered paper size and type. (See Chapter 4,
"Customizing Settings," in the Reference Guide.)
1
Press [Paper Select] on the Change Print Settings screen © press
[Stack Bypass Settings].
Normally, when reserved copying is not being set, the Stack Bypass Settings screen is
automatically displayed when paper is loaded into the stack bypass.
Reserving Jobs 2-47
2