Auto Collate
If Auto Collate is set to 'On', the machine automatically sets the Collate (Offset Collate) mode
when originals are placed in the feeder. This is useful when making multiple sets of copies,
because you do not need to remember to select the Finishing mode.
NOTE
If Auto Collate is set to 'On' and an optional finisher is attached, the Offset Collate mode is set. However,
if no finisher is attached, the Collate mode is set instead.
1
Press
2
Select [On] or [Off]
Image Orientation Priority
If Image Orientation Priority is set to 'On', the machine always copies an image in the same
orientation as the original image. This is because the images on originals may be copied upside
down, depending on the copy mode set.
NOTE
If Image Orientation Priority is set to 'On', the copy speed is slower than normal.
1
Press
2
Select [On] or [Off]
[Copy Settings]
[Auto Collate].
press [OK].
[Copy Settings]
[Image Orientation Priority].
press [OK].
Customizing Copy Settings
8
8-9