Collating Copies into Sets in Page Order (Collate)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Page
Order (Collate)," on p. 3-36.
IMPORTANT
• The Finisher modes cannot be set if [Transparencies], [Tracing paper], or [Labels] is selected as the
paper type.
• The Collate mode cannot be used with the Booklet or Transparency Interleaving mode.
1
7
7-26
Making a Copy With the Express Copy Basic Features Screen
Press [Collate].
Press [Collate Not Set] if you do not want to collate the output.
If you want the copies slightly offset vertically in the output tray, press [Offset].
Collate Not Set
Collate
Offset