Canon iR6570 Manual page 120

2
G If you want to select a standard paper size:
2
2-48 Reserving Jobs
Select the desired paper size.
NOTE
• If you select [Tracing Paper], [Transparency], or [Labels], make sure that you do not specify any
Finisher modes (Collate, Group, or Staple).
• If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is
set to 'On', and the paper size/type have been stored, the selected paper size/type are displayed
on the screen. (See Chapter 4, "Customizing Settings," in the Reference Guide.)
❑
Select the desired paper size © press [Next].
NOTE
To select an inch paper size, press [Inch-size].