Feeding Different-Size Originals Together In The Feeder (Different Size Originals) - Canon imageRUNNER 3300 Series Copying Manual

Feeding Different-size Originals Together in the
Feeder
(Different Size Originals)
This function enables you to copy different-size originals together in one group, by setting
them in the feeder.
IMPORTANT
•
This function can be set when the Feeder (DADF-H1) is attached.
•
When the machine is operating in the Different Size Originals mode, you cannot use the Book
2-sided, Two-page Separation, Booklet, Image Combination, Image Separation, or Image Repeat
modes.
•
You cannot select the Shift mode when you set "Automatic Paper Selection" in combination with
the Different Size Originals mode.
•
All originals placed together in the feeder must be the same weight (paper type).
•
To set originals of different widths, align the top edge of the document with the back edge of the
feeder.
•
Set different-size originals in the combinations as follows. Other combinations may damage the
originals.
- 11''x17'' and LGL, LTR and LGL, LTR and LTRR.
•
When you place different-width originals, the originals may move slightly when fed to the platen
glass, and as a result, the images may be scanned and copied slanted.
•
You cannot set the Staple mode when placing different-width originals.
NOTE
•
When combined with Different Size Originals, two-sided copying cannot be performed. The different-
size originals will be printed as one-sided copies on their respective sizes.
1
Place your originals in the feeder, and press "Special Features"
press "Different Size Originals."
NOTE
•
When Auto Collate is set to "On," the Collate mode or the Offset Collate mode is
automatically set when you place the originals in the feeder. (See 'Setting Automatic
Collate On/Off,' on p.3-5.)

Feeding Different-size Originals Together in the Feeder (Different Size Originals)

2
A
2-43