Feeding Different-sized Originals Together
in the Feeder
This function enables you to copy different sized originals, together as one group, by setting them
in the feeder.
IMPORTANT
•
When the machine is operating in the Different Size Originals mode, you cannot use, the Book 2-sided,
Two-page Separation, Image Combination, Image Separation, Booklet, and Image Repeat modes.
•
All originals placed together in the feeder must be the same weight (paper type).
•
You cannot set Automatic Paper Selection when you select the Different Size Original mode in
combination with the Shift or Cover/Sheet Insertion modes.
•
Auto Orientation cannot be performed when you set the Different Size Originals mode.
•
When the machine is operating in the Different Size Originals mode, the scanning speed is somewhat
slower than other modes.
NOTE
•
When the machine is operating in the Different Size Originals mode, combined use with 1 to 2-sided
originals, two-sided copying cannot be performed. The different-sized originals will be printed as
one-sided copies on their respective paper sizes.
1
Place your originals in the feeder, and press [Special Features].
NOTE
•
When <Auto Collate> is set to <On>, the Collate mode or the Offset Collate mode is
automatically set when you place the originals in the feeder. (See "Setting Automatic Collate",
on p. 3-5.)
Feeding Different-sized Originals Together in the Feeder (Different Size Originals)
(Different Size Originals)
2
2-47