Different Size Originals - Canon imageRunner 2220i User Manual

1

Different Size Originals

This function enables you to scan different-sized originals together as one group, by
setting them in the feeder.
IMPORTANT
•
When the machine is operating in the Different Size Originals mode, you cannot use the
Manual Document Size Select, Document Size Select (Other Size, Long Strip Original),
Stamping Original, Two-Page Separation, Original Frame Erase, or Book Frame Erase
modes.
•
When the machine is operating in the Different Size Originals mode, you cannot use
Direct Sending for Fax.
•
All originals placed together in the feeder must be the same weight (paper type).
•
When placing originals of different widths, align the top edge of the originals with the
back edge of the feeder.
•
Set originals of different sizes into the feeder as follows. Other combinations may
damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR.
•
When you place originals with different widths, the originals may move slightly when fed
to the platen glass. As a result, the images may be scanned as slanted.
NOTE
However, the length (vertical direction) of the different paper sizes must be the same. For
example, LTR and 11" x 17", or STMT and LTRR paper sizes can be scanned together.
1-112 Changing the Scan Settings
NOTE
To cancel the setting, press [Special Features] © [Two-page Separation].
•
To cancel the scan setting, press the Scan Settings drop-down list © press [Option]
•
© [Cancel].
•
If Preview is set to 'On', you can preview the images of documents before sending.
(See "Previewing Originals (Preview)," on p. 1-178.)
•
To cancel all settings at once, press
Standard Scanning mode.)
(Reset). (The machine returns to the