AT&T 3B2 Off-Line Diagnostic Manual page 459

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Phas. D.scrlptlons
Phase '#8 - EPORTS - Interrupt Control Registers
Phase Name:
Type:
Function:
Tests:
Time:
Warnings:
Notes:
Phase #8 Tests
EPORTS - Interrupt Control Registers (cptLA)
Demand
This phase verifies that the internal registers of the INTEL 80186 CPU
Interrupt Controller (IC) are functioning properly.
Tests 1 through 8 - check the IC In-service register.
Tests 9 through 11 - check the Interrupt Request register.
Tests 12 through 20 - check the Interrupt Mask register.
Tests 21 through 23 - check the Interrupt Priority Mask register.
Tests 24 through 28 - check the Interrupt Status register.
Tests 29 through 40 - check the DMAO and DMA1 Control registers.
Tests 41 through 56 - check the INTO and INT1 Control registers.
Tests 57 through 69 - check the INT2 and INT3 Control registers.
2 seconds
None
None
Test Numbers: 1 through 8
Function: These tests verify that the IC In-service register is functional.
Procedure: Write a valid data pattern to the register, read the register, and compare the
value read with the value that was written.
Hardware Tested: The IC In-service register is tested.
Data Returned: Supplemental Data: The value that was written.
Raw Data: The value that was read.
Notes: The values written to the register are OxOOOO, Ox0001, Ox0004, Ox0008, Ox0010,
Ox0020, Ox0040, Ox0080, Ox0100, and Ox0200.
EPORTS DIAGNOSTICS 9-15