AT&T 3B2 Off-Line Diagnostic Manual page 535

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Phase Descriptions
Test Number: 3
Function: This test reads the physical drive information and defect table.
Procedure: The physical drive information and defect table are read.
Hardware Tested: The XDC is tested.
Data Returned: The number of the test that failed, the actual data, and the expected data are
returned.
Notes: None
Test Number: 4
Function: This test reads and compares the ID field of the diagnostic cylinder.
Procedure: The diagnostic cylinder ID field is read and compared.
Hardware Tested: The XDC is tested.
Data Returned: The number of the test that failed, the actual data, and the expected data are
returned.
Notes: None
Test Numbers: 101 through 104
Function: These tests are the same as Tests 1 through 4 except that diskl is used.
Procedure: Same as Tests 1 through 4 except that diskl is tested.
Hardware Tested: The XDC is tested.
Data Returned: The number of the test that failed, the actual data, and the expected data are
returned.
Notes: None
EXPANSION DISK CONTROLLER DIAGNOSTICS 11-41