Xilinx Virtex-7 FPGA VC7222 IBERT Getting Started Manual page 45

7.
X-Ref Target - Figure 2-5
VC7222 IBERT Getting Started Guide
UG971 (v5.0) June 12, 2014
A Customize IP window opens. In the Protocol Definition tab, change
LineRate(Gbps) to 13.0. Use the drop-down menu to change the Refclk(MHz)
to 325.00. Do not change other defaults
Figure 2-5: Customize IP - Protocol Definition
www.xilinx.com
(Figure 2-5).
Send Feedback
45