Xilinx Virtex-7 FPGA VC7222 IBERT Getting Started Manual page 19

2.
X-Ref Target - Figure 1-14
VC7222 IBERT Getting Started Guide
UG971 (v5.0) June 12, 2014
In the Hardware window, right-click XC7VH580T_1 and select Refresh Device
(Figure 1-14).
Note:
If the FPGA was not programmed using the SD card, provide both the programming and
the probes files, and then select Program Device.
Figure 1-14: Program/Refresh Device
www.xilinx.com
Running the GTH IBERT Demonstration
Send Feedback
19