Xilinx Virtex-7 FPGA VC7222 IBERT Getting Started Manual page 16

Chapter 1: VC7222 IBERT Getting Started Guide
2.
X-Ref Target - Figure 1-11
3.
4.
16
Send Feedback
In the Open Hardware Manager window, click Open a new hardware target
(highlighted in Figure 1-11).
Figure 1-11: Open a New Hardware Target
An Open Hardware Target wizard starts. Click Next to run the wizard.
In the Hardware Server Settings window, select Local server (target is on
local machine). Click Next to open the server and connect to the Xilinx TCF JTAG
cable.
www.xilinx.com VC7222 IBERT Getting Started Guide
UG971 (v5.0) June 12, 2014