Xilinx Virtex-7 FPGA VC7222 IBERT Getting Started Manual page 37

6.
X-Ref Target - Figure 1-32
VC7222 IBERT Getting Started Guide
UG971 (v5.0) June 12, 2014
If links are created manually, the Create Links window is displayed. The options in this
window are used to link any TX GT to any RX GT. To create links, select the TX GT and
RX GT from the two lists, then click the Add Link button. For this project, connect
the following links (Figure
• Lane0/TX to Lane0/RX
• Lane1/TX to Lane1/RX
• Lane2/TX to Lane2/RX
• Lane3/TX to Lane3/RX
• Lane4/TX to Lane4/RX
• Lane5/TX to Lane5/RX
• Lane6/TX to Lane6/RX
• Lane7/TX to Lane7/RX
Figure 1-32: Create Links Window
www.xilinx.com
Running the GTZ IBERT Demonstration
1-32):
37
Send Feedback