Cover Disassembly - JLG 600SJ Service And Maintenance Manual

Cover Disassembly

1. Remove O-Ring (17) from groove in Cover (6A).
2. Remove Thrust Washer (2) from Cover (6A) pockets.
3. Unscrew two Hex Head Bolts (6C) and remove Dis-
engage Cap (6B) from Cover (6A).
4. Pull Disengage Rod (6D) out from Cover (6A).
3121202
6D. Disengage
2. Thrust Washer
Rod
6A. Cover
6E. O-Ring
6B. Disengage Cap
6F. Pipe Plug
6C. Bolt
17. O-Ring
Figure 3-9. Cover
5. Use appropriate tool to remove O-ring (6E) from
6. Remove two O-Ring Pipe Plugs (6F) from Cover
– JLG Lift –
SECTION 3 - CHASSIS & TURNTABLE
internal groove in Cover (6A).
(6A).
3-11