Powertrack Maintenance; Remove Link - JLG 600SC Service And Maintenance Manual

4.19 POWERTRACK MAINTENANCE

Remove Link

NOTE: Hoses shown in powertrack are for example only. Actual
hose and cable arrangements are different.
1. Clamp bar and poly roller tightly so they do not spin
when removing screw. With a small ¼" ratchet and a 
T-20 Torx bit, remove 8-32 x 0.500 screw from one side.
3121776
SECTION 4 - BOOM & PLATFORM
2. Repeat step 1 and remove screw from other side of
track. Remove bar/poly roller from powertrack.
REPOSITION CABLES/HOSES. KEEP COVERED DURING GRINDING TO PREVENT
DAMAGE.
4-25