Connecting The Microphone - Ikegami HDK-790GX Operation Manual

3.2 Camera and Peripheral Installation and Connection

Connecting the Microphone

This product is equipped with two microphone channels (MIC-1 and MIC-2). Select them depending on the operating conditions.
The MIC AMP module is optional.
1
Connect the microphone connector to MIC-1 or
MIC-2 connector.
2
Switch the power supply for the microphone.
Set the MIC-1 or MIC-2 POWER switch according to
the power supply method of your microphone.
See the user's manual of your microphone for details on
the microphone.
AB+12V : For a microphone that requires +12V AB
power supply
OFF : For a dynamic microphone or other type
of microphone that does not require power
supply
P.+48V : For a microphone that requires +48V
phantom power supply
Reference:
Set the GAIN setting for the microphone ampli er by
the menu operation.
See "Chapter 5. Setting with menu functions" for the setting menu.
40
Latch lever
Microphone connector
HDK-790GX 1403 VER1 (U)
MIC-2 connector
MIC-1 connector
Microphone
Cover
MIC-1 POWER switch
MIC-2 POWER switch