Operating Systems - Ikegami HC-HD300 Operation Manual

1.2 Operating Systems

This product is equipped with functions which interface with a control panel and a control
unit. If you use the BSF-300, this product can support not only stand-alone VTR shooting
but also various shooting styles such as studio shooting and field shooting as a system
camera.
Furthermore, you can choose and operate using various control panels connected to the BS,
for your purpose.
■ Example of Minimum Configuration of System Camera (1 camera, 1 OCP, 1 MCP)
Camera Head
BS
WFM
COMM
■ Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
Camera Head
PM
BS-1
WFM
COMM
BS-8
PM
PM
PM
WFM
OCP
WFM
WFM CONT
MCP
OCP
PM WFM
WFM
CONT
PM
BS-1
WFM, COMM
CSU
BS-8
PM, WFM, COMM
HC-HD300 1412 VER1 (U)
Note:
Term:
Term:
DC 12V
AC ADAPTER
AC
* In the case of MCP-200
PM WFM
OUT Term:
IN
MCP
1.2 Operating Systems
For Minimum operating System,
no MCP is needed when the
OCP-10 is used.
When any MCP other than
an MCP-200 is used, AC
ADAPTER is not required.
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
MCP (Maintenance Control
Panel)
This control panel is used
for maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition in memory
and make setup easy. By using a
CSU together with an MCP, you
can maintain up to 32 cameras.
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using an MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.
1
5