Setting The Digital Extender - Ikegami HDK-790GX Operation Manual

Setting the digital extender

You can set ON/OFF for the digital extender function and the magni cation from the switch on the camera, the camera menu, or a
remote controller (OCP, MCP, etc.).
Reference:
See "5.2 Settings from the Menu [Menu Confi guration and content]" in this chapter for setting the digital extender from the
camera menu.
Refer to the instruction manual for the respective remote controller for setting the EFFECT lter from a remote controller.
1
Keep pressing the MENU SELECT switch on the camera control panel, without the camera menu displayed, until
the character of the digital extender fl ashes.
2
While the character of digital extender is fl ashing, turn the MENU SELECT switch to any magnifi cation, and
press the MENU SELECT switch.
Note:
Flashing stops automatically about 3 seconds after the setting procedure is completed.
Reference:
You can restrict the setting of ON/OFF and magni cation of the digital extender from the MENU SELECT switch. See "5.2
Settings from the Menu [Menu Confi guration and content]" in this chapter.
CAMERA
ON
STBY MENU SELECT
(PUSH SET)
FRONT REAR VF
VF
ON
TALLY TALLY LAMP MARKER
CHARACTER
ON ON ON ON MENU
DIM DIM ON
OFF OFF OFF OFF
CURSOR
VF IND
POSITION SIZE
CROSS
OFF
BOX
VF DTL
CROSS
OFF
BOX
FILTER
ND ECC EFFECT
HEAD 1 2 3 4 5 A B C D E
AUTO
SLOW
CAMERA control panel
HDK-790GX 1403 VER1 (U)
5.1 Settings Using Switches on the Camera
MENU SELECT switch
FAN
5
67